PVC labor protection gloves mainly refer to dipped gloves made of pvc material. The outside of the gloves is PVC rubber surface, and the inside of the gloves is cotton or flannel lining, which is comfortable to wear and resistant to oil, acid and alkali. The common ones are blue oil-resistant gloves, yellow dipped plastic gloves, anti-slip gloves, cold-proof gloves and so on. The color of PVC labor protection gloves made of synthetic rubber should be very uniform, and the palm part should be relatively thick, but the thickness of other parts should be the same. And its surface should be relatively smooth. It is important that the glove does not have any damage on it, otherwise it can no longer be used. After use, PVC labor insurance gloves should clean the outside and lining part of the gloves, and apply sliding lime to smooth the security. Labor insurance gloves need to be paid special attention not to be placed directly on the ground. PVC labor insurance gloves should be inspected accordingly on a regular basis. If damage is found, corresponding measures should be taken. For PVC labor protection gloves made of rubber, you should not let them come into contact with substances such as acids for a long time. At the same time, labor protection gloves should pay attention not to let such sharp objects touch it. The chemical penetration resistance of PVC labor protection gloves is very important because of its physical properties, including resistance to trimming, tearing, puncturing, and abrasion. PVC labor insurance gloves should be tested for pressure resistance and electricity resistance every six months to avoid danger due to the reduction of these properties due to long-term use. As long as everyone can keep these three aspects in mind during use, labor insurance gloves are used in the correct way, and I believe that it can not only ensure the integrity and durability of the gloves, but also ensure their own safety.
Acid and alkali resistant gloves are protective products to prevent acid and alkali damage to the hands. Such gloves can be divided into rubber acid and alkali resistant gloves, latex acid and alkali resistant gloves, plastic acid and alkali resistant gloves, and dipped acid and alkali resistant gloves according to the material. Waterproof gloves and gas-proof gloves can be replaced by acid and alkali resistant gloves. Oil-resistant gloves are made of nitrile rubber, chloroprene or polyurethane and other materials to protect the skin of the hands from being stimulated by oily substances and cause various skin diseases, such as acute dermatitis, acne, folliculitis, dry skin, chapped , pigmentation and nail changes. Welder's gloves are personal protective equipment for preventing high temperature, molten metal, and sparks from burning hands during welding. It is made of cow, pig marmoset leather or two-layer leather, and can be divided into two-finger type, three-finger type and five-finger type according to different finger types.
